GPS天线线型对AUV阻力和尾流场的影响

靠近艉部的GPS天线线型对AUV的阻力以及桨盘面处的伴流品质有直接影响。高品质的伴流场能有效地降低噪声并提高水动力性能。为了获得最优的GPS天线线型,以某自主式水下机器人(AUV)为母型,采用ICEM-CFD、Fluent等CFD软件,结合RANS方法和SSTκ-ω模型对搭载不同线型GPS天线的AUV进行数值计算。研究结果表明GPS天线设计前倾角可以有效降低天线的阻力,从而降低AUV受到的整体阻力。具有一定前倾角和尾端曲线的GPS天线有利于改善AUV尾部伴流特性,减小桨盘面伴流速度的不均匀度。     

轨道交通车辆的工艺流程标准化

从生产线建立、工艺流程编制、工艺布局设计和生产能力等方面进行分析,提出了轨道交通车辆工艺流程标准化设计方法和优化方法。基于精益管理理念和工序能力测算法,可以合理编制标准化工艺流程,从而降低劳动强度,提高生产效率。     

上游静止柱体对圆柱体结构尾激振动的影响

文章运用半隐式特征线分裂算子有限元算法对串列布置的静止上游柱体和下游圆柱的尾激振动问题进行了数值模拟研究。数值结果表明:上游柱体结构的形状、尺寸比(d/D)和折减速度(Ur)三个参数对下游圆柱体结构的动力响应、运动轨迹与涡脱落模态有着显著的影响,且与单圆柱工况相比存在明显区别;随着尺寸比的增大,上/下游柱体结构之间的互扰作用会由流致效应逐渐转变为尾流效应,使得频率特性发生变化,并会导致下游圆柱体结构的振动响应增强;当d/D=0.5和1.0时,下游圆柱体结构的运动轨迹主要为“8”字形;当d/D=1.5时,除了“8”字形外,运动轨迹还会呈现双弯刀形、“双8”字形和不规则形状。通过对流体力系数与位移时程曲线及位移PSD曲线特性进行分析,揭示了其相互作用的内在机理。另外,下游圆柱体结构的尾流场特性也会随参数的变化而变化,其涡脱落模态主要为2S、P+S和2P三种。     

技术站间货物列车协同配流方案研究

技术站间货物列车协同作业组织模式，可实现各站获益，整体加强，对提升铁路运输生产效率具有重要意义.本文建立技术站间货物列车协同配流模型.模型以最大化两技术站的正点出发列车数作为目标函数，采用启发式遗传算法进行寻优，得到货物列车解编顺序和配流方案.最后，通过对算例进行实验分析，验证协同配流模型的实用性.结果表明，技术站间协同配流作业明显压缩车辆在站总停留时间，增加了阶段计划内正点出发列车数，进而提高了技术站内线路使用能力.     

PCTC船货舱通风系统设计

PCTC船货舱通风系统的设计是整个PCTC船设计的一个重要组成部分,关系到总体、结构、舾装、轮机和电气等多个专业的设计。近几年来,PCTC船的货舱通风系统的设计也在不断的变化、改进和优化中,本人基于本所目前设计开发的6600UNITS PCTC船型,对这些年来PCTC船货舱通风系统的设计做了一个总结和分析,供相关设计人员参考。     

Time-variant bulk carrier reliability analysis in pure bending intact and damage conditions

Time-variant reliability analysis of a corroded bulk carrier in intact and damage conditions is performed by First-Order (FORM), Second-Order (SORM) Reliability Methods and Importance Sampling simulation. Annual failure probabilities are determined up to 25-year ship lifetime, accounting for time-variant corrosion wastage of structural members contributing to hull girder strength. Statistical properties of hull girder capacity are determined by Monte Carlo simulation, applying three correlation models among corrosion wastages of structural members contributing to hull girder strength, namely no correlation, full correlation and full correlation among wastages of structural members belonging to the same category of compartments. A modified incremental-iterative method is applied, to account for instantaneous neutral axis rotation, in case of asymmetrical damage conditions, as for collision and grounding events. Incidence of intact/damage condition, as well as correlation among corrosion wastages, on annual sagging/hogging time-variant failure probability is investigated and discussed. Time-variant sensitivity analyses for intact and damage conditions are also performed, to investigate the incidence of random variables' uncertainties on the attained failure probability. Finally, the bulk carrier section scheme, benchmarked in the last ISSC Report, is applied as test case.     

Modeling free-flow speed according to different water depths—From the viewpoint of dynamic hydraulic pressure

In this paper, we propose a method of modeling free flow speed from the viewpoint of hydroplaning. First, the lift forces for different water depths were estimated using Bernoulli’s equation. Compared with the result of the experimental test performed by the Japan Automobile Research Institute, the hydrodynamic pressure coefficient was determined to be 0.03 (tf s²/m⁴). The validation of the predicted lift force is found in another published paper. A very good match is found between the computed values by the proposed numerical model and the data in other published papers. Then, the loss of contact force is considered to evaluate the hydroplaning performance of a tire. To simulate the hydroplaning speed, a tire-sliding model was utilized to obtain the traction and friction forces between the road surface and the tire. The observation data obtained in Japan in 2009 is compared with the physically computed hydroplaning speed, yielding the conclusion that the traction force at the measured desired speed is, on average, 23.4% of the traction force at hydroplaning speed. The analytical model offers a useful tool to quantitatively show that the free flow speed changes as the water depth increase.     

基于特征熵权与样本加权的大跨桥梁多车道交通荷载聚类模型

为满足交通流荷载作用下大跨桥梁结构评估的需要，研究了基于荷载参数特征的交通流状态划分方法。首先，基于实测交通流数据，按照车道属性统计分析得到交通流的单位小时特征参数样本，选择单位小时内车型比例、车头间距及交通流速度作为交通流状态划分的参考特征；其次，改进经典k-means聚类算法以增强其对高维、复杂交通流荷载分类的鲁棒性，即通过引入特征熵值来表征各特征参数对聚类效果的重要性，同时计算样本点与周围样本点的接近程度来赋予样本点权值，以削弱样本离散性对聚类质量的不利影响；最后，通过聚类算法得到11种具有不同参数特征的交通流荷载，分析了其作用下某大跨斜拉桥拉索应力响应及造成的疲劳损伤。结果表明：改进算法的聚类质量指标比原始k-means算法提高了40%以上，对交通流状态划分具有良好的适用性；通过算法得到的不同类别的交通流荷载的特征参数差异性明显，其占有率也大不相同，同一类别的交通流荷载各样本特征参数聚拢效果良好；同车道内不同类别的交通流荷载的拉索等效应力差别较大，其变异系数均在0.2以上，尤其在考虑了不同交通流荷载模型的占有率后，这种差异性进一步增大。上述结果表明该交通流荷载聚类与模拟方法是有效、准确的，对相关大跨桥梁结构安全及耐久性评估有一定的参考价值。     

公路隧道运营通风横通道周围流场特性研究

为研究公路隧道巷道式运营通风横通道周围的流场特性,以贵州凉风坳隧道为研究背景,利用流体力学研究软件Fluent建立隧道三维模型并进行了数值仿真计算。通过在隧道两边等风速条件下,对隧道内人行横通道以及车行横通道附近的流场特点研究,分析了运营通风横通道周围流场分布的具体特点。模拟结果表明:车行横通道与人行横通道两边流场分布基本相同;横通道内风速相对较小,约为隧道内风速的10%;不同风速下,横通道附近的速度分布和总压分布整体走势一致;两边流场相对稳定,不会进行风流和污染物的串流。     

基于客流需求的城市轨道交通动态时刻表优化模型

为使城市轨道交通列车运行时刻表更贴合客流需求,依据不断变化的客流需求确定每列车的发车时刻和停站时间,采用多目标优化方法构建以乘客出行时间费用和列车运行时间费用最小为目标、列车发车时刻和停站时间为决策变量的城市轨道交通动态时刻表优化模型,并采用粒子群算法求解。以广州地铁13号线为例进行验证,结果表明优化后的时刻表更满足客流需求,能有效地提高乘客出行效率,具有更好的动态适应性。